Executive Summary - Specification and Supply Position
TL;DR - The Mistairhome WL-QH07U (PRO) holds 1020 mL and mists 92 mL per hour or 42.4 mL per hour, which is 11.1 hours and 24.1 hours per fill; it covers 24 sq m (261 sq ft) at a 2.6 m ceiling and measures 27.8 dB on the high step and 25.2 dB on the sleep step; it draws 5.8 W and runs from USB-C 5V/2A; no internal cell on this build; it weighs 782 g and measures 14.6 x 14.6 x 25.4 cm, and ships documented to CE / RoHS / FCC standards for import into United States. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Quiet Humidifier for Bedroom 28dB with UV-C category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common tank and seal line and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
Full specification of WL-QH07U-PRO:
| Misting method | Ultrasonic piezo disc at 1.7 MHz under closed-loop humidity control |
| Tank capacity | 1020 mL |
| Mist output on the high step | 92 mL per hour |
| Mist output on the low step | 42.4 mL per hour |
| Run time per fill on the high step | 11.1 hours |
| Run time per fill on the low step | 24.1 hours |
| Coverage area | 24 sq m (261 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 27.8 dB |
| Noise at 1 m on the sleep step | 25.2 dB |
| Water type | Tap or distilled; the tank opens at the top and reaches a hand at the bottom |
| Mineral dust handling | Cartridge bay plus a silver ion ring in the tank on the Pro build |
| Fill method | Top fill with a removable lid and a wide brush opening |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/2A |
| Rated power on the high step | 5.8 W |
| Control interface | Capacitive panel with target humidity, three mist steps, timer and child lock |
| Night light | Seven-colour ring plus a white reading mode, both switchable off |
| Protection | Dry-run shut-off, tilt switch, sensor fault alert, overcurrent limit |
| Dimensions | 14.6 x 14.6 x 25.4 cm |
| Weight | 782 g |
| Warranty | 24 months |
Shipping configuration: Pro build, + spare misting disc + demineralisation cartridge + multilingual manual. Master carton holds 18 units. Stated lead time is 20-30 days from order confirmation and deposit. Misting discs, wicks and cartridges are repeat line items and are ordered separately from the appliance.
Why Buyers Are Sourcing This Category Now
The strongest pull in United States now comes from hospitality, clinical and facilities buyers rather than households, because they can put a number on complaints and on room-turn time, which makes the decision easy to defend internally. Market entry cost keeps falling because small-batch first orders are viable: a distributor can test a range without committing to full container quantities on unproven models.
For the Quiet Humidifier for Bedroom 28dB with UV-C segment the deciding specifications are the noise figure at the step people sleep on, the run time per fill, and what the unit does with dissolved minerals. Peak mist volume ranks below all three, which surprises first-time buyers. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the water handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves United States through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and battery files listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-QH07U (PRO) the figures worth carrying into the next order are the 1020 mL tank, the 24.1 hours per fill on the low step, and the 25.2 dB reading on the sleep step.
Engineering Notes - Noise, Mist Output and Water Quality
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the coverage figure, and it is the one most often quoted dishonestly. We state the ceiling height behind it, because a floor area alone means nothing: a room with 3.4 m ceilings holds proportionally more air and will run a unit dry faster than the floor plan suggests, and a mechanically ventilated room loses moisture continuously regardless of its size. Any buyer can check this in twenty minutes with a hygrometer, and we would rather they did.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, pack capacity against the cell specification by discharge test where a cell is fitted, and dry-run shut-off function on an empty tank. The WL-QH07U (PRO) packs 18 units to a carton, carries a 24 months warranty and a 20-30 days stated lead time, and draws 5.8 W on the high step.
Featured Deployment and Field Case Records
Three deployment records from the Quiet Humidifier for Bedroom 28dB with UV-C programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Case Study 1: Miraflores, Peru
Deployment: A physiotherapy and rehabilitation centre with nine treatment cubicles
Timing: Ten months from August 2025
Two things decided this one. The cubicles are separated by curtains rather than walls, so a unit audible in the next cubicle breaks patient confidentiality; and the centre wanted nothing in the air whose composition could not be declared. The evaporative build answered both at once, since the water never becomes airborne and the fan noise at the low step sits under the ambient level of a room with a humidifier running two cubicles away.
Case Study 2: Tampere, Finland
Deployment: A regional distributor supplying electrical wholesalers across western Finland
Timing: Two heating seasons from September 2024
Finnish heating seasons are long and the indoor air is dry for most of them, so the category sells itself; what the distributor needed was a range that could be explained in one page. We supplied a comparison sheet with mist output, run time per fill and noise for all eight chassis on a single page, and the distributor translated it into Finnish and put it on the counter. That sheet is now the reason the range is in their second season.
Case Study 3: George Town, Malaysia
Deployment: A heritage hotel in a shophouse conversion with 32 rooms
Timing: One year from August 2025
Heritage shophouses have deep floorplates and limited natural ventilation, so the rooms hold heat and the air conditioning dries them further. The hotel took a mixed order of two chassis because the rooms are genuinely different sizes, which is a more honest specification than one model for all 32. Occupancy-driven complaints about dry air stopped appearing in the guest survey.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the unit could be cleaned inside the time a round allows, and whether anyone complained about the noise or the dust. Those are the questions we ask before quoting. The WL-QH07U (PRO) packs 18 units to a carton, carries a 24 months warranty and a 20-30 days stated lead time, and draws 5.8 W on the high step.
Application Scenarios Across Bedrooms, Offices and Wards
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC08-STUDY | Shared study bedrooms and student residences with thin partition walls | A unit that can be heard from the next bed is a unit that gets unplugged by the end of the first week. | The quiet chassis runs below the ambient level of a shared room at night, and the light can be switched off entirely rather than merely dimmed. |
| SC01-NURSERY | Night feeds and settled sleep in a room shared with an infant | Nothing should wake a sleeping infant, and no lamp should be on when the room is dark. | The sleep step holds output low all night while the chassis stays under the ambient level of a quiet bedroom, and the night light can be switched off entirely rather than merely dimmed. |
| SC04-LIGHTS | Rooms where occupants sleep with the light off and wake if anything glows | A lamp that can only be dimmed and not extinguished is the most common reason a unit gets unplugged. | The night light switches to fully dark, the status indicator sits behind the outlet grille, and the display dims to nothing without changing the mist output. |
| SC07-WARD | Post-operative and long-stay wards where the supply air is filtered and the parts list matters | Whatever goes into the air has to be declarable, which rules out heated and additive-based systems. | Cool mist leaves the water composition unchanged, the material declaration covers every wetted part, and the evaporative build holds minerals in the wick rather than releasing them. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the cleaning task fits the round. For this configuration that means 42.4 mL per hour at 25.2 dB, holding 24.1 hours per fill across a 24 sq m (261 sq ft) room.
What a Factory-Direct Programme Changes for the Buyer
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which cell and which seal is inside the unit, and what each of them costs to replace. That matters in this category more than most, because the wearing parts are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a consumable loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, because that configuration produces a return rate rather than a reorder, and a factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-QH07U (PRO) packs 18 units to a carton, carries a 24 months warranty and a 20-30 days stated lead time, and draws 5.8 W on the high step.
Certification, Water Quality and Market Access
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the water path, and a clinical or childcare buyer will ask about that before it asks about EMC. We hold a material declaration for every wetted part - tank, seal, disc and outlet - and it is the document that most often decides a hospital order.
The third is the battery overlay. Where a cell is fitted, UN38.3 and IEC 62133 sit on top of everything else and add a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 42.4 mL per hour at 25.2 dB, holding 24.1 hours per fill across a 24 sq m (261 sq ft) room.
Unit Economics, Consumables and Order Sizing
Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.124 cubic metres per master carton of 18 units, a 20 ft container takes about 171 cartons, or roughly 3,078 units, and a 40 ft container about 376 cartons, or roughly 6,768 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.
The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. We suggest one spare disc per twenty units on a first order and one cartridge per unit where the water is hard, and both ride in the same container as the appliances.
The third is the cost of a return. In this category the majority of returns come from mineral dust, not from malfunction, and the cartridge that prevents them costs a fraction of the return it avoids. For this configuration that means 42.4 mL per hour at 25.2 dB, holding 24.1 hours per fill across a 24 sq m (261 sq ft) room.
Buyer Questions Answered
What is the minimum order quantity for a first quiet humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-QH07U-PRO.
How is the noise figure measured, and what does it mean in a bedroom?
We measure at one metre in a semi-anechoic corner and quote the step, so the two published figures for WL-QH07U are 27.8 dB on the high step and 25.2 dB on the sleep step. The sleep-step figure is the one to compare, because it is the step a bedroom unit is left on all night. A buyer can repeat the measurement in a quiet room with a phone application and will get within a decibel or two.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. Two answers exist: a demineralisation cartridge in the tank, which is a consumable with a real working life, or an evaporative build where the minerals stay in the wick. This unit is specified as cartridge bay plus a silver ion ring in the tank on the pro build.
Which compliance files ship with a quiet humidifier order?
The standard file set is the CE technical file, RoHS and REACH declarations, an EMC test report, the IEC 60335-1 household appliance safety report, and for battery builds a UN38.3 test report with an IEC 62133 cell report and MSDS. For North America we add FCC documentation for the digitally controlled models. Certificates are issued against WL-QH07U, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language and the accessory kit, and most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How often does the unit need cleaning, and what does that involve?
Every five to seven days in continuous use, with a full dry-out if the unit will stand unused. That interval is why we specify a wide tank opening on this chassis: a tank a hand cannot reach into is a tank that never gets cleaned properly. Biofilm in standing water is the underlying reason, and it is not a defect, it is what water at room temperature does.
What warranty and spares support do you provide?
24 months against manufacturing defect on WL-QH07U. Misting discs, wicks, cartridges, seals and cells are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 20-30 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Battery shipments add a documentation step at booking.
Who This Programme Suits
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment shelf, brand owners who want a chassis they can put their own artwork on, pharmacy and home-care groups planning a consumable line, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents. The WL-QH07U (PRO) packs 18 units to a carton, carries a 24 months warranty and a 20-30 days stated lead time, and draws 5.8 W on the high step.
How a First Order Is Structured
The cleanest first orders we see share one habit: the buyer declares the destination list at quotation stage. Certificates, manuals and plugs all follow from it, and raising them once as a package costs far less than raising them market by market as each order lands.
After that the sequence is ordinary. Sample evaluation first, on the actual specification rather than a similar one, with the buyer measuring mist output by a weighed run, run time per fill at the low step, and noise at one metre in a quiet room. Then the proforma invoice, which carries the stated lead time and the packing list rather than leaving them open. Then production, then booking.
The one step buyers skip and regret is the spares decision. Adding a spare disc per twenty units and a cartridge per unit where the water is hard costs almost nothing on a first container and prevents the top-up shipment that otherwise arrives in the middle of the season. On the WL-QH07U (PRO) the figures worth carrying into the next order are the 1020 mL tank, the 24.1 hours per fill on the low step, and the 25.2 dB reading on the sleep step.
Next Step for Import Buyers
If there is one thing to take from this page, it is that the quiet claim and the dust claim are the two that decide the return rate, and both can be checked before an order is placed. Measure the noise on the step people sleep on, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, pharmacy and home-care groups, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-QH07U (PRO) the figures worth carrying into the next order are the 1020 mL tank, the 24.1 hours per fill on the low step, and the 25.2 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 28, 2026
Data sources: in-house factory testing + misting disc and cell specifications + certification and battery files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com